PrimaCreator Value Flex UV Resin – 500 ml – Skin23 September 2023
When you want astonishing results for less cost than many other brands, PrimaCreator VALUE resin should be your first choice! This high-quality resin is made from the best materials and is designed to deliver exceptional prints. With a curing process that can be done in sunlight or a UV curing chamber, you can achieve flexible prints with minimal shrinkage and a soft touch. The finished prints have a solid color with a beautiful matte surface, excellent details, and smooth layer transitions.
Flexible and Impact Resistant
Flexible resin is the perfect choice when you need high detail results with a very high impact strength. With a shore hardness of 65-75 D and an incredible elongation at break of 130%, this resin can be used in various applications and areas.
VALUE resin is specifically developed to perform well on low powered DLP machines such as the Wanhao Duplicator 7, SparkMaker Anycubic Photon, Zortrax Inkspire, and other printers that use UV light for curing. It is optimized for UV Lightsource 395 – 405 nm.
Fast Curing Time
With a curing time of 4 – 12 seconds per layer (depending on color), you can achieve quicker prints without compromising quality.
After printing, simply clean your print in IPA (Isopropyl Alcohol) to rinse off any extra resin left on the model. When it’s time for curing, you can use sunlight or a UV curing chamber. The curing times may vary depending on the print: in a UV light curing chamber, it will take about 2-5 minutes, in sunlight, 10-20 minutes, and in daylight on a cloudy day, it can take up to 60 minutes.
Frequently Asked Questions
1. Can this resin be used with any 3D printer?
No, the PrimaCreator Value Flex UV Resin is specifically designed for low powered DLP machines that use UV light for curing. It is compatible with printers such as the Wanhao Duplicator 7, SparkMaker Anycubic Photon, Zortrax Inkspire, and others.
2. How long does it take for the prints to cure?
The curing times can vary depending on the print and the curing method. In a UV light curing chamber, it will take about 2-5 minutes. In sunlight, the curing time is around 10-20 minutes. On a cloudy day, it can take up to 60 minutes.
3. Is the resin flexible?
Yes, the PrimaCreator Value Flex UV Resin is designed to produce flexible prints with very small shrinkage and a soft touch.
4. Can I achieve high detail results with this resin?
Absolutely! This resin is perfect for high detail prints, thanks to its excellent details and smooth layer transitions.
5. How should I clean the prints after printing?
You can clean your prints in IPA (Isopropyl Alcohol) to rinse off any extra resin left on the model.